Alloy 1200 Aluminium Sheet
Aluminum alloy 1200 is a commercially pure aluminum with high thermal conductivity and excellent corrosion resistance. It is often used in applications where these properties are critical.
| Mechanical Properties: |
|---|
|
Tensile Strength:15,000 psi (103 MPa) Yield Strength: 6,000 psi (41 MPa) Elongation: 35% |
| Physical Properties: |
|
Density: 2.71 g/cm³ (0.0979 lb/in³) Melting Range: 640°C-660°C (1184°F-1220°F) |
| Typical Uses: |
| Reflectors | Heat exchangers | Chemical and food handling equipment | Lighting applications | Radiators |
| Welding: |
| Alloy 1200 is generally considered weldable using standard methods such as gas, electric, resistance, and spot welding. |
| Corrosion Resistance: |
| 1200 has excellent corrosion resistance, particularly in atmospheric conditions. However, it is not suitable for applications where high corrosion resistance is critical. |
1200 Aluminium Sheets
Alloy: 1200 Aluminium Alloy
Temper:
O H14 H24 H18 / T351 T3 T4 T651 T6 / H14 H24 H26 H16 / H32 H111 H321 H116 H112 / T6 T651 / T651 T6 T7451
O : Fully annealed, soft condition with the lowest strength. Excellent workability for deep drawing or spinning.
Thickness: 0.2mm-300mm
Width: 500mm-3000mm
Standard: GB/ 3880-2012 ASTMB209 EN485
Surface Treatment: Mill finish / Brush polish
PVC Coated: One side or two side PVC
MOQ: The inventory has no MOQ
Packing: Standard Export Packing
Port of Dispatch: It depends on the supplier's location and shipping arrangements
Delivery Time: The inventory is 5-7 days . 25-30 days for customized products
Payment: TT / LC / TT+LC
Alloy 1200 Composition: |
|
| Aluminum (Al): | 99.0% |
| Silicon (Si): | 0.05% |
| Iron (Fe): | 0.05% |
| Copper (Cu): | 0.05% |
| Manganese (Mn): | 0.05% |
| Others: | 0.05% (each), 0.15% (total) |
Considerations
Alloy 1200 is known for its high thermal conductivity, making it a preferred choice for applications that require efficient heat transfer.
