7075 Aluminium Plate
Aluminum alloy 7075 is a high-strength, heat-treatable alloy that belongs to the 7000 series of aluminum alloys. It is widely used in aerospace applications and other industries where high strength and low density are critical requirements.
| Properties: |
|---|
|
Density: 2.78 g/cm³ Melting Point: Approximately 635°C (1175°F) Tensile Strength: Varies based on temper and thickness. Yield Strength: Varies based on temper and thickness. Elongation at Break: Varies based on temper and thickness. Modulus of Elasticity: Approximately 71 GPa (10,300 ksi) Thermal Conductivity: 130 W/m·K |
| Details and Characteristics: |
|
High Strength: 7075 alloy is known for its exceptionally high strength, making it one of the strongest aluminum alloys available. Lightweight: Despite its high strength, 7075 alloy is relatively lightweight, making it suitable for aerospace applications where weight reduction is crucial. Fatigue Resistance: It exhibits good fatigue resistance, contributing to its use in applications such as aircraft structures. Corrosion Resistance: While it has good corrosion resistance, it is not as corrosion-resistant as some other aluminum alloys like 6061. In certain environments, protective coatings or treatments may be applied. Weldability: It has fair weldability, but welding should be performed with caution, and post-weld heat treatment may be required to restore properties. Applications: Widely used in aerospace and defense applications, including aircraft structures, missile components, and other high-stress applications. Also used in high-performance products such as bicycle components and rock climbing equipment. Anodizing Compatibility: 7075 alloy is generally compatible with anodizing processes, providing options for surface treatment and enhancement. |
7075 Aluminium Plates
Alloy: 7075 Aluminium Alloy
Temper:
O H14 H24 H18 / T351 T3 T4 T651 T6 / H14 H24 H26 H16 / H32 H111 H321 H116 H112 / T6 T651 / T651 T6 T7451
Thickness: 0.2mm-300mm
Width: 500mm-3000mm
Standard: GB/ 3880-2012 ASTMB209 EN485
Surface Treatment: Mill finish / Brush polish
PVC Coated: One side or two side PVC
MOQ: The inventory has no MOQ
Packing: Standard Export Packing
Port of Dispatch: It depends on the supplier's location and shipping arrangements
Delivery Time: The inventory is 5-7 days . 25-30 days for customized products
Payment: TT / LC / TT+LC
Chemical Composition |
|
| Aluminium (Al): | 90.7% |
|---|---|
| Iron (Fe): | 0.5% |
| Copper (Cu): | 5.1% - 6.1% |
| Titanium (Ti): | 0.10% |
| Manganese (Mn): | 2.1% - 2.9% |
| Magnesium (Mg): | 2.1% - 2.9% |
| Zinc (Zn): | 1.2% - 2.0% |
| Chromium (Cr): | 0.18% - 0.28% |
| other | 0.05%(each) 0.15(total) |
