Aluminium alloy 2017 is a high-strength, heat-treatable alloy known for its excellent machinability, good mechanical properties, and high resistance to corrosion. It belongs to the 2xxx series, which primarily contains copper as the principal alloying element.
| Properties of 2017 Aluminium Alloy |
|---|
Weldability: 2017 alloy can be welded using various methods, although it may require special considerations to avoid cracking during welding. Good Wear Resistance: The alloy demonstrates good wear resistance, making it suitable for applications where components are subjected to abrasive conditions. High Strength: 2017 aluminum is known for its high strength, making it suitable for applications requiring structural integrity and load-bearing capabilities. Excellent Fatigue Resistance: 2017 aluminum alloy has excellent fatigue resistance, making it suitable for applications subject to cyclic loading, such as aerospace components. Heat-Treatable: The alloy can be heat-treated to enhance its mechanical properties, such as strength and hardness. This provides versatility in its use across various industries. Good Corrosion Resistance: While not as corrosion-resistant as some other alloys, 2017 aluminum still offers reasonable corrosion resistance, especially in comparison to high-strength alloys. Moderate Toughness: The alloy exhibits moderate toughness, striking a balance between strength and ductility. This property is important for applications that require a combination of strength and formability. Excellent Machinability: 2017 alloy is highly machinable, making it suitable for applications where intricate shapes and precise dimensions are required. This property is advantageous for the production of pipes and tubes. |
Alloy : 2017 Aluminium Alloy
Temper:
O / F / T3, T4, T5, T6, T7, T351, T451, T651, T851 / H12, H14, H16, H18, H19, H22, H24, H26, H32, H34, H36, H38, H111, H112, H321
Wall Thickness:01mm to 400mm
Type of Pipe: Seamless pipe /Seam pipe /Weld pipe
Standard: GB/T 3880-2012 ASTMB209 EN485
Surface Treatment: Mill Finish / Brush Polish / Bright Finish
MOQ: The inventory has no MOQ 2mt-3mt
Packing: Standard Export Packing
Port of Dispatch: It depends on the supplier's location and shipping arrangements
Delivery Time: The inventory is 5-7 days . 25-30 days for customized products
Payment: TT / LC / TT+LC
Chemical Composition |
|
| Aluminium (Al): | 91.7% |
|---|---|
| Copper (Cu): | 3.5-4.5% |
| Manganese (Mn): | 1.2-2.0% |
| Iron (Fe): | 0.7% |
| Silicon (Si): | 0.2-0.8% |
| Zinc (Zn): | 0.7-1.3% |
| Titanium (Ti): | 0.20% |
| Chromium (Cr): | 0.1% |
| Other Elements: | 0.05% (each), 0.15%(total) |
Phone:
Mobile:
Email:
