Aluminium alloy 5356 is a widely used welding alloy known for its high strength and excellent corrosion resistance. It belongs to the 5xxx series and is primarily composed of magnesium as its principal alloying element, with small amounts of manganese, chromium, and other elements.
Properties of 5356 Aluminium Alloy |
---|
Low-Temperature Toughness: 5356 alloy retains its toughness at low temperatures, making it suitable for applications in cold environments. High Strength: 5356 alloy is known for its high strength, making it suitable for applications where structural integrity and load-bearing capabilities are essential. Excellent Corrosion Resistance: The alloy exhibits excellent corrosion resistance, particularly in environments where exposure to moisture or corrosive substances is a concern. Moderate Machinability: While not as easily machinable as some other alloys, 5356 aluminum can be machined using conventional methods, taking into consideration its high strength and hardness. Good Weldability: 5356 aluminum alloy is highly weldable using various methods, including TIG and MIG welding. This property is crucial for applications involving the fabrication of pipes and tubes. Resistance to Saltwater Corrosion: The high resistance of 5356 alloy to saltwater corrosion makes it an ideal choice for marine applications, including the construction of boat components, pipes, and tubes. Good Formability: The alloy has good formability, allowing for the shaping and forming of components without compromising material integrity. This is essential for the production of pipes and tubes with intricate designs. Anodizing Capability: 5356 alloy can be effectively anodized, providing additional corrosion resistance and enhancing its appearance in certain applications. |
Alloy : 5356 Aluminium Alloy
Temper:
O / F / T3, T4, T5, T6, T7, T351, T451, T651, T851 / H12, H14, H16, H18, H19, H22, H24, H26, H32, H34, H36, H38, H111, H112, H321
Wall Thickness:01mm to 400mm
Type of Pipe: Seamless pipe / Seam pipe / Weld pipe
Standard: GB/T 3880-2012 ASTMB209 EN485
Surface Treatment: Mill Finish / Brush Polish / Bright Finish
MOQ: The inventory has no MOQ 2MT-3MT
Packing: Standard Export Packing
Port of Dispatch: It depends on the supplier's location and shipping arrangements
Delivery Time: The inventory is 5-7 days . 25-30 days for customized products
Payment: TT / LC / TT+LC
Chemical Composition |
|
Aluminium (Al): | 98.4% |
---|---|
Magnesium (Mg): | 4.5-5.5% |
Manganese (Mn): | 0.05-0.20% |
Chromium (Cr): | 0.05-0.20% |
Iron (Fe): | 0.0-0.10% |
Copper (Cu): | 0.1% |
Zinc (Zn): | 0.10% |
Titanium (Ti): | 0.06-0.20% |
Other Elements: | 0.05% (each), 0.15%(total) |
Phone:
Mobile:
Email: