Aluminum alloy 5356 is a commonly used filler metal for welding aluminum alloys, particularly when high strength is required. Finding hexagonal bars specifically made from alloy 5356 might be less common.
| Details and Characteristics: |
|---|
Applications: Fabrication of Aluminum structures | Marine applications | Automotive components | Bicycle frames | Pressure vessels Weldability: 5356 is primarily known for its use as a welding filler metal. It is commonly used to weld aluminum alloys, especially those in the 5XXX series. Surface Finish: The surface finish of 5356 aluminum hex bars, if available, can vary based on manufacturing processes. It can be finished to achieve different levels of smoothness or roughness. Corrosion Resistance: While 5356 is not typically used for its own corrosion resistance, the welded joints it produces can exhibit good corrosion resistance, particularly in marine environments. |
Alloy : 5356 Aluminium Alloy
Temper:
O H14 H18 / T351 T3 T4 / H24 H26 H16 / H32 H111 H321 H116 H112 / T6 T651 / T7451 T6511
Diameter: 10mm-500mm
Length: 500mm-6000mm
Standard: GB/T 3880-2012 ASTMB209 EN485
Surface Treatment: Mill Finish / Brush PSolish / Bright Finish
MOQ: The inventory has no MOQ 2mt-3mt
Packing: Standard Export Packing
Port of Dispatch: It depends on the supplier's location and shipping arrangements
Delivery Time: The inventory is 5-7 days . 25-30 days for customized products
Payment: TT / LC / TT+LC
Chemical Composition |
|
| Aluminium (Al): | 98.8% |
|---|---|
| Magnesium (Mg): | 4.5-5.5% |
| Manganese (Mn): | 0.05-0.20% |
| Titanium (Ti): | 0.06-0.20% |
| Iron (Fe): | 0.25% max |
| Chromium (Cr): | 0.10% max |
| Copper (Cu): | 0.10% max |
| Zinc (Zn): | 0.10% max |
| Other elements: | 0.05% each, 0.15% total |
Phone:
Mobile:
Email:
