Aluminum alloy 6082 is a heat-treatable alloy with excellent corrosion resistance and good machinability. It belongs to the 6000 series of aluminum alloys and is commonly used in structural and engineering applications.
| Properties: |
|---|
|
Density: 2.70 g/cm³ Melting Point: Approximately 555°C (1031°F) Tensile Strength: Varies based on temper and processing. Yield Strength: Varies based on temper and processing. Elongation at Break: Varies based on temper and processing. Modulus of Elasticity: Approximately 68.9 GPa (10,000 ksi) Corrosion Resistance: Good |
| Details and Characteristics: |
|
Corrosion Resistance: 6082 aluminum alloy offers good corrosion resistance and can be further enhanced with various surface treatments such as anodizing. Machinability: It has good machinability, allowing for the fabrication of intricate parts. Weldability: 6082 aluminum has good weldability using conventional welding methods. Heat Treatment: This alloy is heat-treatable, and different temper options (T4, T6, etc.) are available to achieve specific mechanical properties. Applications: Commonly used in structural applications, including bridges, cranes, and various engineering components. It is also used in the construction of marine and transportation vehicles. Surface Finish: 6082 aluminum is often used in applications where a smooth, reflective surface finish is desirable. |
Alloy : 6082 Aluminium Alloy
Temper:
O H14 H18 / T351 T3 T4 / H24 H26 H16 / H32 H111 H321 H116 H112 / T6 T651 / T7451 T6511
Diameter: 10mm-500mm
Length: 500mm-6000mm
Standard: GB/T 3880-2012 ASTMB209 EN485
Surface Treatment: Mill Finish / Brush PSolish / Bright Finish
MOQ: The inventory has no MOQ 2mt-3mt
Packing: Standard Export Packing
Port of Dispatch: It depends on the supplier's location and shipping arrangements
Delivery Time: The inventory is 5-7 days . 25-30 days for customized products
Payment: TT / LC / TT+LC
Chemical Composition |
|
| Aluminum (Al): | 97.3% |
|---|---|
| Silicon (Si): | 0.7% - 1.3% |
| Iron (Fe): | 0.5% |
| Copper (Cu): | 0.10% |
| Manganese (Mn): | 0.4% - 1.0% |
| Magnesium (Mg): | 1.0% - 1.8% |
| Chromium (Cr): | 0.25% - 1.2% |
| Zinc (Zn): | 0.20% |
| Titanium (Ti): | 0.10% |
| Other | 0.05%(each) 0.15(total) |
Phone:
Mobile:
Email:
