6101 Aluminium Round Bar
Aluminum alloy 6101 is a high-strength, heat-treatable alloy that is commonly used in electrical and structural applications. It is known for its excellent conductivity and mechanical properties.
| Properties: |
|---|
|
Density: 2.73 g/cm³ Melting Point: Approximately 590°C (1094°F) Tensile Strength: Varies based on temper and processing. Yield Strength: Varies based on temper and processing. Elongation at Break: Varies based on temper and processing. Modulus of Elasticity: Approximately 68.9 GPa (10,000 ksi) Electrical Conductivity: Approximately 59% IACS (International Annealed Copper Standard) |
| Details and Characteristics: |
|
Conductivity: 6101 aluminum alloy is known for its high electrical conductivity, making it suitable for electrical busbars, conductors, and other electrical applications. Heat Treatment: This alloy is heat-treatable, and different temper options (T4, T6, etc.) are available to achieve specific mechanical properties. Machinability: It has good machinability, allowing for the fabrication of parts with complex shapes. Weldability: 6101 aluminum has good weldability using conventional welding methods. Applications: Commonly used in electrical applications, such as busbars, conductors, and electrical connectors. It is also used in structural components where a combination of strength and conductivity is required. Surface Finish: 6101 aluminum is often used in applications where a smooth, reflective surface finish is desirable. |
6101 Aluminium Round Bars
Alloy : 6101 Aluminium Alloy
Temper:
O H14 H18 / T351 T3 T4 / H24 H26 H16 / H32 H111 H321 H116 H112 / T6 T651 / T7451 T6511
Diameter: 10mm-500mm
Length: 500mm-6000mm
Standard: GB/T 3880-2012 ASTMB209 EN485
Surface Treatment: Mill Finish / Brush PSolish / Bright Finish
MOQ: The inventory has no MOQ 2mt-3mt
Packing: Standard Export Packing
Port of Dispatch: It depends on the supplier's location and shipping arrangements
Delivery Time: The inventory is 5-7 days . 25-30 days for customized products
Payment: TT / LC / TT+LC
Chemical Composition |
|
| Aluminum (Al): | 97.9% |
|---|---|
| Silicon (Si): | 0.30% - 0.60% |
| Iron (Fe): | 0.25% |
| Copper (Cu): | 0.10% |
| Manganese (Mn): | 0.03% |
| Magnesium (Mg): | 0.35% - 0.8% |
| Chromium (Cr): | 0.03% |
| Zinc (Zn): | 0.10% |
| Other | 0.05%(each) 0.15(total) |
