Aluminum alloy 3004 is a non-heat-treatable alloy known for its excellent corrosion resistance and formability. It belongs to the 3000 series of aluminum alloys and is commonly used in various applications where these properties are crucial.
| Properties: |
|---|
|
Density: 2.73 g/cm³ Melting Point: Approximately 650°C (1202°F) Tensile Strength: Varies based on temper and processing. Yield Strength: Varies based on temper and processing. Elongation at Break: Varies based on temper and processing. Modulus of Elasticity: Approximately 70 GPa (10,000 ksi) Corrosion Resistance: Excellent |
| Details and Characteristics: |
Weldability: 3004 aluminum has excellent weldability using conventional welding methods. Formability: It has good formability and is often used in applications that require intricate forming and bending. Surface Finish: 3004 aluminum is often used in applications where a smooth, reflective surface finish is desirable. |
Alloy : 3004 Aluminium Alloy
Temper:
O H14 H18 / T351 T3 T4 / H24 H26 H16 / H32 H111 H321 H116 H112 / T6 T651 / T7451 T6511
Diameter: 10mm-500mm
Length: 500mm-6000mm
Standard: GB/T 3880-2012 ASTMB209 EN485
Surface Treatment: Mill Finish / Brush PSolish / Bright Finish
MOQ: The inventory has no MOQ 2mt-3mt
Packing: Standard Export Packing
Port of Dispatch: It depends on the supplier's location and shipping arrangements
Delivery Time: The inventory is 5-7 days . 25-30 days for customized products
Payment: TT / LC / TT+LC
Chemical Composition |
|
| Aluminum (Al): | 95.8% |
|---|---|
| Copper (Cu): | 0.25% |
| Iron (Fe): | 0.7% |
| Manganese (Mn): | 1.0% - 1.5% |
| Magnesium (Mg): | 0.8% - 1.3% |
| Silicon (Si): | 0.3% |
| Zinc (Zn): | 0.25% |
| Other | 0.05%(each) 0.15(total) |
Phone:
Mobile:
Email:
