Aluminum alloy 6061 is a heat-treatable alloy with excellent strength, corrosion resistance, and good machinability. It belongs to the 6000 series of aluminum alloys and is widely used in various applications, including aerospace, automotive, and structural components.
| Properties: |
|---|
|
Density: 2.70 g/cm3 Melting Point: Approximately 580oC (1085oF) Tensile Strength: Varies based on temper and processing. Yield Strength: Varies based on temper and processing. Elongation at Break: Varies based on temper and processing. Modulus of Elasticity: Approximately 68.9 GPa (10,000 ksi) Corrosion Resistance: Good |
| Details and Characteristics: |
Weldability: 6061 aluminum has good weldability using conventional welding methods. Machinability: 6061 is known for its good machinability, allowing for the fabrication of intricate parts. Strength: It has excellent strength, making it suitable for structural applications where a high strength-to-weight ratio is essential. |
Alloy : 6061 Aluminium Alloy
Temper:
O H14 H18 / T351 T3 T4 / H24 H26 H16 / H32 H111 H321 H116 H112 / T6 T651 / T7451 T6511
Diameter: 10mm-500mm
Length: 500mm-6000mm
Standard: GB/T 3880-2012 ASTMB209 EN485
Surface Treatment: Mill Finish / Brush PSolish / Bright Finish
MOQ: The inventory has no MOQ 2mt-3mt
Packing: Standard Export Packing
Port of Dispatch: It depends on the supplier's location and shipping arrangements
Delivery Time: The inventory is 5-7 days . 25-30 days for customized products
Payment: TT / LC / TT+LC
Chemical Composition |
|
| Aluminum (Al): | 97.9% |
|---|---|
| Silicon (Si): | 0.4% - 0.8% |
| Iron (Fe): | 0.7% |
| Copper (Cu): | 0.15% - 0.40% |
| Manganese (Mn): | 0.15% |
| Magnesium (Mg): | 1.0% - 1.2% |
| Chromium (Cr): | 0.04% - 0.35% |
| Zinc (Zn): | 0.25% |
| Titanium (Ti): | 0.15% |
| Other | 0.05%(each) 0.15(total) |
Phone:
Mobile:
Email:
