Aluminum alloy 5356 is a commonly used filler metal alloy for welding aluminum. It is primarily designed for welding 5xxx series aluminum alloys and is well-suited for applications in marine environments due to its good resistance to corrosion.
| Properties: |
|---|
Density:2.67 g/cm³ Melting Point:Approximately 575°C (1070°F) Tensile Strength:Varies based on the welding process and conditions. Yield Strength:Varies based on the welding process and conditions. Elongation at Break:Varies based on the welding process and conditions. Modulus of Elasticity:Approximately 70 GPa (10,200 ksi) |
| Details and Characteristics: |
Anodizing Compatibility:5356 is often chosen in applications where anodizing is required, as it responds well to anodizing treatments. Weldability:5356 is widely used as a welding wire filler metal due to its excellent weldability. It is suitable for both manual and automatic welding processes. Corrosion Resistance:This alloy offers good corrosion resistance, particularly in marine environments. It is often chosen for welding applications where corrosion resistance is crucial. |
Alloy: 5356 Aluminium Alloy
Temper:
O H14 H24 H18 / T351 T3 T4 T651 T6 / H14 H24 H26 H16 / H32 H111 H321 H116 H112 / T6 T651 / T651 T6 T7451
Thickness: 0.2mm-300mm
Width: 500mm-3000mm
Standard: GB/ 3880-2012 ASTMB209 EN485
Surface Treatment: Mill finish / Brush polish
PVC Coated: One side or two side PVC
MOQ: The inventory has no MOQ
Packing: Standard Export Packing
Port of Dispatch: It depends on the supplier's location and shipping arrangements
Delivery Time: The inventory is 5-7 days . 25-30 days for customized products
Payment: TT / LC / TT+LC
Chemical Composition |
|
| Aluminium (Al): | 98.7% |
|---|---|
| Manganese (Mn): | 0.05% - 0.20% |
| Magnesium (Mg): | 4.5% - 5.5% |
| Zinc (Zn): | 0.10% |
| Chromium (Cr): | 0.05% - 0.20% |
| Titanium (Ti): | 0.06% - 0.20% |
| Others | 0.05%(each)- 0.15%(total) |
Phone:
Mobile:
Email:
