7050 Aluminium Plate

Aluminum alloy 7050 is a high-strength, heat-treatable alloy that belongs to the 7000 series of aluminum alloys. It is known for its excellent strength-to-weight ratio and good resistance to stress corrosion cracking.

Properties:
Density: 2.78 g/cm³ Melting Point: Approximately 635°C (1175°F) Tensile Strength: Varies based on temper and thickness. Yield Strength: Varies based on temper and thickness. Elongation at Break: Varies based on temper and thickness. Modulus of Elasticity: Approximately 71 GPa (10,300 ksi) Thermal Conductivity: 139 W/m·K
Details and Characteristics:
High Strength: 7050 alloy is known for its high strength, making it suitable for applications where strength is a critical factor. It is often used in aerospace and military applications. Stress Corrosion Cracking Resistance: It exhibits good resistance to stress corrosion cracking, making it suitable for applications in aerospace and other industries where this property is crucial. Applications: Commonly used in aerospace applications, including aircraft structures and components. It is also used in the manufacturing of high-strength structural components in various industries.

7050 Aluminium Plates

Alloy: 7050 Aluminium Alloy

Temper: O H14 H24 H18 / T351 T3 T4 T651 T6 / H14 H24 H26 H16 / H32 H111 H321 H116 H112 / T6 T651 / T651 T6 T7451

Thickness: 0.2mm-300mm

Width: 500mm-3000mm

Standard: GB/ 3880-2012 ASTMB209 EN485

Surface Treatment: Mill finish / Brush polish

PVC Coated: One side or two side PVC

MOQ: The inventory has no MOQ

Packing: Standard Export Packing

Port of Dispatch: It depends on the supplier's location and shipping arrangements

Delivery Time: The inventory is 5-7 days . 25-30 days for customized products

Payment: TT / LC / TT+LC

Chemical Composition
Aluminium (Al):	89.1%
Iron (Fe):	0.15%
Copper (Cu):	2.0% - 2.6%
Titanium (Ti):	0.10%
Manganese (Mn):	1.9% - 2.6%
Magnesium (Mg):	2.1% - 2.9%
Zinc (Zn):	6.2% - 6.7%
Chromium (Cr):	0.04% - 0.14%
other	0.05%(each) 0.15(total)

Toughness: While not as tough as some other alloys like 7075, 7050 alloy offers a good balance of strength and toughness.

Anodizing Compatibility: 7050 alloy is generally compatible with anodizing processes, providing options for surface treatment and enhancement.

Weldability: It has fair to good weldability, although special precautions may be required to avoid cracking. Heat treatment after welding is often recommended.