Aluminum alloy 5454 is a non-heat-treatable alloy with good formability, corrosion resistance, and weldability. It belongs to the 5xxx series of aluminum alloys and is commonly used in applications where moderate strength and excellent corrosion resistance are required.
Properties: |
---|
Density:2.68 g/cm³ Melting Point:Approximately 635°C (1175°F) Tensile Strength:Varies based on the temper and thickness. Yield Strength:Varies based on the temper and thickness. Elongation at Break:Varies based on the temper and thickness. Modulus of Elasticity:Approximately 70 GPa (10,200 ksi) Thermal Conductivity:130 W/m·K |
Details and Characteristics: |
Weldability:5454 aluminum has good weldability, making it suitable for various welding and joining methods. Formability:It offers good formability, making it suitable for a variety of forming processes, including bending and deep drawing. Anodizing Compatibility:5454 alloy is not typically chosen for anodizing applications as it may not respond well to this treatment. |
Alloy: 5454 Aluminium Alloy
Temper:
O H14 H24 H18 / T351 T3 T4 T651 T6 / H14 H24 H26 H16 / H32 H111 H321 H116 H112 / T6 T651 / T651 T6 T7451
Thickness: 0.2mm-300mm
Width: 500mm-3000mm
Standard: GB/ 3880-2012 ASTMB209 EN485
Surface Treatment: Mill finish / Brush polish
PVC Coated: One side or two side PVC
MOQ: The inventory has no MOQ
Packing: Standard Export Packing
Port of Dispatch: It depends on the supplier's location and shipping arrangements
Delivery Time: The inventory is 5-7 days . 25-30 days for customized products
Payment: TT / LC / TT+LC
Chemical Composition |
|
Aluminium (Al): | 95.7% |
---|---|
Iron (Fe): | 0.25% |
Manganese (Mn): | 0.4% - 1.0% |
Magnesium (Mg): | 2.7% - 3.3% |
Zinc (Zn): | 0.25% |
Chromium (Cr): | 0.05% - 0.20% |
Others: | 0.05%(each) - 0.15%(total) |
Phone:
Mobile:
Email: