Aluminum alloy 6060 is a medium-strength heat-treatable alloy that belongs to the 6000 series of aluminum alloys. It is known for its good formability, weldability, and moderate strength.
Properties: |
---|
Density:2.70 g/cm³ Melting Point:Approximately 580°C (1076°F) Tensile Strength:Varies based on temper and thickness. Yield Strength:Varies based on temper and thickness. Elongation at Break:Varies based on temper and thickness. Modulus of Elasticity:Approximately 69 GPa (10,000 ksi) Thermal Conductivity:166 W/m·K |
Details and Characteristics: |
Weldability:It has good weldability, allowing for various welding and joining methods. Anodizing Compatibility:6060 alloy is suitable for anodizing to achieve enhanced surface properties. Formability:6060 alloy offers good formability, making it suitable for a variety of forming processes such as extrusion. Moderate Strength:It provides moderate strength, suitable for applications where strength requirements are not extremely high. |
Alloy: 6060 Aluminium Alloy
Temper:
O H14 H24 H18 / T351 T3 T4 T651 T6 / H14 H24 H26 H16 / H32 H111 H321 H116 H112 / T6 T651 / T651 T6 T7451
Thickness: 0.2mm-300mm
Width: 500mm-3000mm
Standard: GB/ 3880-2012 ASTMB209 EN485
Surface Treatment: Mill finish / Brush polish
PVC Coated: One side or two side PVC
MOQ: The inventory has no MOQ
Packing: Standard Export Packing
Port of Dispatch: It depends on the supplier's location and shipping arrangements
Delivery Time: The inventory is 5-7 days . 25-30 days for customized products
Payment: TT / LC / TT+LC
Chemical Composition |
|
Aluminium (Al): | 98.9% |
---|---|
Silicon (Si): | 0.30% - 0.60% |
Copper (Cu): | 0.10% |
Iron (Fe): | 0.10% |
Manganese (Mn): | 0.35% - 0.60% |
Magnesium (Mg): | 0.35% - 0.60% |
Zinc (Zn): | 0.15% |
Chromium (Cr): | 0.05% - 0.15% |
Titanium (Ti): | 0.10% |
Other | 0.05%(each) 0.15(total) |
Phone:
Mobile:
Email: