1070 Aluminium Sheet
Aluminum alloy 1070 is a commercially pure aluminum with high electrical conductivity and excellent formability. It is often used in electrical and chemical applications where these properties are essential.
| Mechanical Properties: |
|---|
Tensile Strength:15,000 psi (103 MPa) Yield Strength: 6,000 psi (41 MPa) Elongation: 35% |
| Physical Properties: |
Density: 2.70 g/cm³ (0.0975 lb/in³) Melting Range: 643°C-658°C (1190°F-1216°F) |
| Typical Uses: |
Capacitor foil Electronic components Reflectors Decorative parts Chemical and food handling equipment Lighting applications |
| Welding: |
Alloy 1070 is generally considered weldable using standard methods such as gas, electric, resistance, and spot welding. |
| Corrosion Resistance: |
1070 has good corrosion resistance, particularly in atmospheric conditions. However, it is not suitable for applications where high corrosion resistance is critical. |
1070 Aluminium Sheets
Alloy : 1070 Aluminium Alloy
Temper :
O H14 H24 H18 / T351 T3 T4 T651 T6 / H14 H24 H26 H16 / H32 H111 H321 H116 H112 / T6 T651 / T651 T6 T7451
O : Fully annealed, soft condition with the lowest strength. Excellent workability for deep drawing or spinning.
H12: Strain-hardened, 1/4 hard. Increased strength achieved by cold working and partial annealing.
H14: Strain-hardened, 1/2 hard. Higher strength and improved formability compared to H12.
H16: Strain-hardened, 3/4 hard. Increased strength with some retention of formability.
H18: Strain-hardened, full hard. Maximum strength achieved through cold working and annealing.
Thickness : 0.2mm-300mm
Width : 500mm-3000mm
Standard : GB/ 3880-2012 ASTMB209 EN485
Surface Treatment : Mill finish / Brush polish
PVC Coated : One side or two side PVC
MOQ : The inventory has no MOQ
Packing : Standard Export Packing
Port of Dispatch : It depends on the supplier's location and shipping arrangements
Delivery Time : The inventory is 5-7 days . 25-30 days for customized products
Payment : TT / LC / TT+LC
Alloy 1070 Composition: |
|
| Aluminum (Al): | 99.7% |
| Silicon (Si): | 0.20% |
| Iron (Fe): | 0.25% |
| Copper (Cu): | 0.04% |
| Manganese (Mn): | 0.03% |
| Magnesium (Mg): | 0.03% |
| Titanium (Ti): | 0.03% |
| Zinc (Zn) | 0.04% |
| Others: | 0.03% (each), 0.10% (total) |
Considerations
Alloy 1070 is prized for its high electrical conductivity, making it a preferred choice for electrical applications such as capacitor foil.
