Price of Best Quality Aluminium 6060 Sheet in Temper T651
6061 aluminium sheets

6060 Aluminium Sheets

Aluminum alloy 6060 is a medium-strength, heat-treatable alloy with good formability and excellent corrosion resistance. It is commonly used in architectural and structural applications due to its favorable combination of mechanical properties and surface finish.


Mechanical Properties:
Tensile Strength: 22,000 psi (150 MPa)
Yield Strength: 16,000 psi (110 MPa)
Elongation: 12%

Physical Properties:
Density: 2.70 g/cm3 (0.0975 lb/in3)
Melting Range: 585oC-650oC (1085oF-1202oF)

Typical Uses:
Architectural and structural applications | Extruded profiles for window and door frames | Heat sinks | Automotive components | Ladders and scaffolding

Welding:
6060 is readily weldable using standard methods such as gas, electric, resistance, and arc welding. However, welding should be approached with caution due to the sensitivity of the alloy to cracking. Special precautions and welding procedures may be necessary.

Corrosion Resistance:
6060 has good corrosion resistance, making it suitable for outdoor applications. Its resistance to corrosion can be further enhanced with various surface treatments, such as anodizing.

6060 Aluminium Sheets


Alloy : 6060 Aluminium Alloy


Temper : O H14 H24 H18 / T351 T3 T4 T651 T6 / H14 H24 H26 H16 / H32 H111 H321 H116 H112 / T651 T6 T7451
T5: Cooled from an elevated temperature shaping process and artificially aged.
T6: Solution heat-treated and artificially aged.


Thickness : 0.2mm-300mm


Width : 500mm-3000mm


Standard : GB/ 3880-2012 ASTMB209 EN485


Surface Treatment : Mill finish / Brush polish


PVC Coated : One side or two side PVC


MOQ : The inventory has no MOQ


Packing : Standard Export Packing


Port of Dispatch : It depends on the supplier's location and shipping arrangements


Delivery Time : The inventory is 5-7 days . 25-30 days for customized products


Payment : TT / LC / TT+LC


Alloy 6060 Composition:

Aluminum (Al): 98.9%
Silicon (Si): 0.6%-1.0%
Iron (Fe): 0.35%-0.6%
Copper (Cu): 0.10%-0.30%
Manganese (Mn): 0.10%
Magnesium (Mg): 0.10%
Chromium (Cr): 0.05%
Zinc (Zn): 0.15%
Titanium (Ti): 0.10%
Others: 0.05% (each) 0.15% (total)

Considerations: 6060 is known for its good surface finish and is often chosen for applications where aesthetics are important. It is not as strong as some other aluminum alloys, but its formability and corrosion resistance make it suitable for certain applications.

Address

67,KIKA STREET,GULALWADI,MUMBAI MAHARASHTRA,400004.
Phone: 02267521208
Mobile: +91 9769223965
Email: team@6061aluminium.com

logo