8011 Aluminium Sheet
Aluminum alloy 8011 is a wrought alloy commonly used for packaging, particularly in the food and pharmaceutical industries. It is known for its excellent formability, corrosion resistance, and heat-sealability.
| Mechanical Properties: |
|---|
|
Tensile Strength: 55,000 psi (380 MPa) Yield Strength: 30,000 psi (205 MPa) Elongation: 20% |
| Physical Properties: |
|
Density: 2.71 g/cm³ (0.0979 lb/in³) Melting Range: 580°C-640°C (1076°F-1184°F) |
| Welding: |
| 8011 is generally considered readily weldable using standard methods such as gas tungsten arc welding (GTAW/TIG) and gas metal arc welding (GMAW/MIG). However, welding should be approached with care, and appropriate techniques for welding thin materials should be applied. |
| Corrosion Resistance: |
| 8011 has good corrosion resistance, making it suitable for applications in which the material comes into contact with various substances, such as food or pharmaceutical products. |
| Considerations |
| 8011 is characterized by its excellent formability, which is a critical property for its use in packaging applications. It has good heat-sealability, making it suitable for applications where a tight seal is required. |
8011 Aluminium Sheets
Alloy: 8011 Aluminium Alloy
Temper:
O H14 H24 H18 / T351 T3 T4 T651 T6 / H14 H24 H26 H16 / H32 H111 H321 H116 H112 / T6 T651 / T651 T6 T7451
O: Fully annealed, soft condition with the lowest strength. This temper is often used for applications that do not require additional strength.
H14: Strain-hardened, partially annealed. It has a moderate increase in strength.
Thickness: 0.2mm-300mm
Width: 500mm-3000mm
Standard: GB/ 3880-2012 ASTMB209 EN485
Surface Treatment: Mill finish / Brush polish
PVC Coated: One side or two side PVC
MOQ: The inventory has no MOQ
Packing: Standard Export Packing
Port of Dispatch: It depends on the supplier's location and shipping arrangements
Delivery Time: The inventory is 5-7 days . 25-30 days for customized products
Payment: TT / LC / TT+LC
Alloy 8011 Composition: | |
| Aluminum (Al): | 98.8% |
| Copper (Cu): | 0.10% |
| Manganese (Mn): | 0.20% |
| Silicon (Si): | 0.50% - 0.9% |
| Iron (Fe): | 0.6% - 1.0% |
| Zinc (Zn): | 0.10% |
| Others: | 0.05% (each) 0.15% (total) |
Typical Uses:
♦ Household foil
♦ Heat exchanger fins
♦ Insulation material
♦ Pharmaceutical packaging
♦ Packaging materials, such as aluminum foil for food packaging
