5754 Aluminium Sheet
Aluminum alloy 5754 is a non-heat-treatable alloy with excellent corrosion resistance and high strength. It is commonly used in applications where corrosion resistance and durability are crucial.
| Mechanical Properties: |
|---|
|
Tensile Strength: 42,000 psi (290 MPa) Yield Strength: 23,000 psi (160 MPa) Elongation: 13% |
| Physical Properties: |
|
Density: 2.68 g/cm³ (0.0975 lb/in³) Melting Range: 570°C-640°C (1058°F-1184°F) |
| Typical Uses: |
| Shipbuilding | Vehicle bodies | Flooring applications | Architectural panels | Welded structures | Storage tanks |
| Welding: |
| 5754 is readily weldable using standard methods such as gas, electric, resistance, and spot welding. It has good weldability and retains good strength in the welded condition. |
| Corrosion Resistance: |
| 5754 has excellent corrosion resistance, particularly in marine environments. It is resistant to stress corrosion cracking and exhibits good performance in corrosive conditions. |
5754 Aluminium Sheets
Alloy: 5754 Aluminium Alloy
Temper:
O H14 H24 H18 / T351 T3 T4 T651 T6 / H14 H24 H26 H16 / H32 H111 H321 H116 H112 / T6 T651 / T651 T6 T7451
H22: Strain-hardened and partially annealed. The work-hardening rate is moderate, and the product has medium strength.
H111: Fully annealed, with a slightly lower strength than H22. This temper is often used for applications that do not require additional strain hardening.
Thickness: 0.2mm-300mm
Width: 500mm-3000mm
Standard: GB/ 3880-2012 ASTMB209 EN485
Surface Treatment: Mill finish / Brush polish
PVC Coated: One side or two side PVC
MOQ: The inventory has no MOQ
Packing: Standard Export Packing
Port of Dispatch: It depends on the supplier's location and shipping arrangements
Delivery Time: The inventory is 5-7 days . 25-30 days for customized products
Payment: TT / LC / TT+LC
Alloy 5754 Composition: |
|
| Aluminum (Al): | 95.7% |
| Magnesium (Mg): | 2.6%-3.6% |
| Iron (Fe): | 0.40% |
| Copper (Cu): | 0.10% |
| Manganese (Mn): | 0.50% |
| Chromium (Cr): | 0.30% |
| Silicon (Si): | 0.40% |
| Zinc (Zn): | 0.20% |
| Others: | 0.05% (each) 0.15% (total) |
Considerations: 5754 is often chosen for applications where a combination of strength, formability, and corrosion resistance is required. It is not heat-treatable but gains strength through strain hardening.
