Stocklist of Aluminium 5356 H112 Sheets in Mumbai
sheet

5356 Aluminium Sheet

Aluminum alloy 5356 is a commonly used filler metal for welding aluminum alloys, particularly in the construction and fabrication of marine and structural components. It is often employed in gas metal arc welding (GMAW/MIG) and gas tungsten arc welding (GTAW/TIG) processes.


Mechanical Properties:
Tensile Strength: 38,000 psi (262 MPa)
Yield Strength: 29,000 psi (200 MPa)
Elongation: 18%

Physical Properties:
Density: 2.68 g/cm3 (0.0975 lb/in3)
Melting Range: 575oC-632oC (1067oF-1170oF)

Typical Uses:
Welding and fabrication of aluminum structures | Marine applications | Automotive components | Structural components in construction

Welding:
5356 is known for its good fluidity and penetration characteristics.
It provides good strength and ductility in the as-welded condition.

Gas Metal Arc Welding (GMAW/MIG): Commonly used for welding applications where high deposition rates are desired.

Gas Tungsten Arc Welding (GTAW/TIG): Suitable for applications where high-quality welds are required, such as in the aerospace industry.

5356 Aluminium Sheets


Alloy : 1100 1050 1060 1070 1200 2011 2014 2017 2024 3003 3004 3005 3015 3105 5052 5083 5086 5154 5254 5356 5454 5056 5182 5754 6060 6061 6063 6082 6101 7020 7050 7075 8011 8090


Temper : O H14 H24 H18 / T351 T3 T4 T651 T6 / H14 H24 H26 H16 / H32 H111 H321 H116 H112 / T6 T651 / T651 T6 T7451


Thickness : 0.2mm-300mm


Width : 500mm-3000mm


Standard : GB/ 3880-2012 ASTMB209 EN485


Surface Treatment : Mill finish / Brush polish


PVC Coated : One side or two side PVC


MOQ : The inventory has no MOQ


Packing : Standard Export Packing


Port of Dispatch : It depends on the supplier's location and shipping arrangements


Delivery Time : The inventory is 5-7 days . 25-30 days for customized products


Payment : TT / LC / TT+LC


Alloy 5356 Composition:

Aluminum (Al): 98.9%
Magnesium (Mg): 4.5%-5.5%
Iron (Fe): 0.4%
Copper (Cu): 0.1%
Manganese (Mn): 0.05%-0.20%
Chromium (Cr): 0.05%-0.20%
Titanium (Ti): 0.06%-0.20%
Zinc (Zn): 0.10%
Others: 0.05% (each) 0.15% (total)

Corrosion Resistance: 5356 offers good corrosion resistance, making it suitable for welding applications in corrosive environments.

Considerations: It is often chosen for its good weldability and performance in various welding processes.Post-weld heat treatment is not typically required for 5356.

Address

67,KIKA STREET,GULALWADI,MUMBAI MAHARASHTRA,400004.
Phone: 02267521208
Mobile: +91 9769223965
Email: team@6061aluminium.com

logo