5083 Aluminium Sheet
Aluminum alloy 5083 is a high-strength, non-heat-treatable alloy with excellent corrosion resistance, especially in marine environments. It is often used in applications that require high strength and resistance to corrosive environments.
| Mechanical Properties: |
|---|
|
Tensile Strength: 42,000 psi (290 MPa) Yield Strength: 21,000 psi (145 MPa) Elongation: 12% |
| Physical Properties: |
|
Density: (0.0975 lb/in³) Melting Range: 570°C-640°C (1058°F-1184°F) |
| Typical Uses: |
| Shipbuilding | Marine structures | Pressure vessels | LNG tankers | Armor plate | Welded structures |
| Welding: |
| 5083 is readily weldable using standard methods such as gas, electric, resistance, and spot welding. It has good weldability with excellent performance in post-weld heat treatment. |
| Corrosion Resistance: |
| It is not heat-treatable but gains strength through strain hardening. |
| Considerations |
| 5083 has excellent corrosion resistance, particularly in seawater. It is known for its high resistance to stress corrosion cracking and general corrosion in marine environments. |
5083 Aluminium Sheets
Alloy: 5083 Aluminium Alloy
Temper:
O H14 H24 H18 / T351 T3 T4 T651 T6 / H14 H24 H26 H16 / H32 H111 H321 H116 H112 / T6 T651 / T651 T6 T7451
H116: Strain-hardened from a hot-worked condition, stabilized. The least amount of strain hardening with the highest ductility.
H321: Strain-hardened from a hot-worked condition, stabilized. Similar to H116 but with improved stress corrosion resistance.
O: Fully annealed, soft condition with the lowest strength. Excellent workability for deep drawing or spinning.
Thickness: 0.2mm-300mm
Width: 500mm-3000mm
Standard: GB/ 3880-2012 ASTMB209 EN485
Surface Treatment: Mill finish / Brush polish
PVC Coated: One side or two side PVC
MOQ: The inventory has no MOQ
Packing: Standard Export Packing
Port of Dispatch: It depends on the supplier's location and shipping arrangements
Delivery Time: The inventory is 5-7 days . 25-30 days for customized products
Payment: TT / LC / TT+LC
Alloy 5083 Composition: |
|
| Aluminum (Al): | 91.9% |
| Magnesium (Mg): | 4.0%-4.9% |
| Iron (Fe): | 0.0%-0.4% |
| Copper (Cu): | 0.1% |
| Manganese (Mn): | 0.4%-1.0% |
| Zinc (Zn) | 0.25% |
| Chromium (Cr): | 0.05%-0.25% |
| Titanium (Ti): | 0.15% |
| Others: | 0.05% (each) 0.15% (total) |
