Aluminum alloy 1100 is a commercially pure aluminum alloy with excellent corrosion resistance and high thermal conductivity.
| Mechanical Properties: |
|---|
| Tensile Strength: 13,000 psi (90 MPa) Yield Strength: 5,000 psi (35 MPa) Elongation: 30% |
| Physical Properties: |
| Density: 2.70 g/cm³ (0.0975 lb/in³) Melting Range: 643°C-657°C (1190°F-1215°F) |
| Typical Uses: |
|
Chemical and food processing equipment Heat exchangers Radiators General sheet metal work Refrigeration panels Cooking utensils |
| Welding: |
| Alloy 1100 is weldable by all standard methods, including gas, electric, resistance, and spot welding. |
| Corrosion Resistance: |
| Aluminum alloy 1100 has excellent corrosion resistance, particularly in atmospheric conditions. |
| Other Considerations: |
| Alloy 1100 is known for its high reflectivity, making it a popular choice for lighting fixtures, reflective materials, and decorative applications. |
Alloy : 1100 1050 1060 1070 1200 2011 2014 2017 2024 3003 3004 3005 3015 3105 5052 5083 5086 5154 5254 5356 5454 5056 5182 5754 6060 6061 6063 6082 6101 7020 7050 7075 8011 8090
Temper :
O H14 H24 H18 / T351 T3 T4 T651 T6 / H14 H24 H26 H16 / H32 H111 H321 H116 H112 / T6 T651 / T651 T6 T7451
O (Annealed):Fully annealed, soft condition with the lowest strength. It has excellent workability and is suitable for deep drawing or spinning.
H12: Strain-hardened, 1/4 hard. This temper is achieved by cold working and then partially annealing. It offers increased strength.
H14: Strain-hardened, 1/2 hard. Similar to H12 but with further cold working. It provides higher strength and improved formability.
H16: Strain-hardened, 3/4 hard. Achieved through cold working and further annealing. It offers increased strength but retains some formability.
H18: Strain-hardened, fully hard. This temper provides the highest strength but the lowest formability.
Thickness : 0.2mm-300mm
Width : 500mm-3000mm
Standard : GB/ 3880-2012 ASTMB209 EN485
Surface Treatment : Mill finish / Brush polish
PVC Coated : One side or two side PVC
MOQ : The inventory has no MOQ
Packing : Standard Export Packing
Port of Dispatch : It depends on the supplier's location and shipping arrangements
Delivery Time : The inventory is 5-7 days . 25-30 days for customized products
Payment : TT / LC / TT+LC
Alloy 1100 Composition: |
|
| Aluminum (Al): | 99.00% |
| Copper (Cu): | 0.05% |
| Iron (Fe): | 0.40% |
| Silicon (Si): | 0.95% |
| Manganese (Mn): | 0.05% |
| Zinc (Zn): | 0.10% |
| Titanium (Ti): | 0.10% |
| Other elements: | 0.05% each, 0.15% total |
Phone:
Mobile:
Email:
