5454 Aluminium Sheet
Aluminum alloy 5454 is a non-heat-treatable alloy primarily known for its excellent corrosion resistance and high strength. It finds applications in marine environments and other industries where corrosion resistance and strength are critical.
| Mechanical Properties: |
|---|
|
Tensile Strength: 41,000 psi (283 MPa) Yield Strength: 29,000 psi (200 MPa) Elongation: 16% |
| Physical Properties: |
|
Density: 2.68 g/cm3 (0.0975 lb/in3) Melting Range: 570oC-640oC (1058oF-1184oF) |
| Typical Uses: |
| Welded structures Pressure vessels Marine applications Storage tanks Automotive applications |
| Welding: |
| 5454 is readily weldable using standard methods such as gas, electric, resistance, and spot welding. It performs well in various welding processes and retains good strength in the welded condition. |
| Corrosion Resistance: |
| 5454 has excellent corrosion resistance, particularly in marine environments. It is resistant to stress corrosion cracking and exhibits good performance in corrosive conditions. |
| Considerations |
| 5454 is often chosen for applications where a combination of strength and corrosion resistance is required. While not as strong as some other alloys like 5083, it offers improved corrosion resistance. |
5454 Aluminium Sheets
Alloy : 5454
Temper :
O H14 H24 H18 / T351 T3 T4 T651 T6 / H14 H24 H26 H16 / H32 H111 H321 H116 H112 / T6 T651 / T651 T6 T7451
H32: Strain-hardened and stabilized. The work-hardening rate is moderate, and the product has medium strength.
O: Fully annealed, soft condition with the lowest strength. Excellent workability for deep drawing or spinning.
Thickness : 0.2mm-300mm
Width : 500mm-3000mm
Standard : GB/ 3880-2012 ASTMB209 EN485
Surface Treatment : Mill finish / Brush polish
PVC Coated : One side or two side PVC
MOQ : The inventory has no MOQ
Packing : Standard Export Packing
Port of Dispatch : It depends on the supplier's location and shipping arrangements
Delivery Time : The inventory is 5-7 days . 25-30 days for customized products
Payment : TT / LC / TT+LC
Alloy 5454 Composition: |
|
| Aluminum (Al): | 95.7% |
| Magnesium (Mg): | 2.7%-3.3% |
| Iron (Fe): | 0.25% |
| Copper (Cu): | 0.1% |
| Manganese (Mn): | 0.4%-1.0% |
| Chromium (Cr): | 0.05%-0.20% |
| Titanium (Ti): | 0.20% |
| Zinc (Zn): | 0.25% |
| Others: | 0.05% (each) 0.15% (total) |
