6061 Aluminium Sheet
Aluminum alloy 6061 is a versatile and widely used heat-treatable alloy with good strength, formability, and corrosion resistance. It is commonly used in various structural and industrial applications.
| Mechanical Properties: |
|---|
|
Tensile Strength: 45,000 psi (310 MPa) Yield Strength: 40,000 psi (276 MPa) Elongation: 8% |
| Physical Properties: |
|
Density: 2.70 g/cm3 (0.0975 lb/in3) Melting Range: 580oC-650oC (1076oF-1202oF) |
| Typical Uses: |
| Structural components in aircraft and aerospace applications Automotive parts Bicycle frames Marine components Industrial machinery Sporting goods |
| Welding: |
| 6061 is readily weldable using various welding methods, including gas metal arc welding (GMAW/MIG), gas tungsten arc welding (GTAW/TIG), and resistance welding. It responds well to fusion and resistance welding processes. |
| Corrosion Resistance: |
| 6061 has good corrosion resistance, especially in environments where it is exposed to moisture. However, it is not as corrosion-resistant as some other aluminum alloys like 5052 or 5083. |
| Considerations |
| 6061 is known for its excellent machinability, making it suitable for applications where machining operations are required. It is widely used in extruded shapes, sheets, plates, and other forms. |
6061 Aluminium Sheets
Alloy : 6061 Aluminium Alloy
Temper :
O H14 H24 H18 / T351 T3 T4 T651 T6 / H14 H24 H26 H16 / H32 H111 H321 H116 H112 / T6 T651 / T651 T6 T7451
T6: Solution heat-treated and artificially aged. This is the most common temper for 6061 extrusions, providing good strength and toughness.
T651: Solution heat-treated, stress-relieved by stretching, and artificially aged. Similar to T6 but with additional stress relief.
Thickness : 0.2mm-300mm
Width : 500mm-3000mm
Standard : GB/ 3880-2012 ASTMB209 EN485
Surface Treatment : Mill finish / Brush polish
PVC Coated : One side or two side PVC
MOQ : The inventory has no MOQ
Packing : Standard Export Packing
Port of Dispatch : It depends on the supplier's location and shipping arrangements
Delivery Time : The inventory is 5-7 days . 25-30 days for customized products
Payment : TT / LC / TT+LC
Alloy 6061 Composition: |
|
| Aluminum (Al): | 97.9% |
| Silicon (Si): | 0.6% |
| Iron (Fe): | 0.7% |
| Copper (Cu): | 1.0% |
| Manganese (Mn): | 0.3% |
| Magnesium (Mg): | 1.0%-1.4% |
| Chromium (Cr): | 0.04%-0.35% |
| Zinc (Zn): | 0.25% |
| Titanium (Ti): | 0.15% |
| Others: | 0.05% (each) 0.15% (total) |
