5356 Aluminium Sheet
Aluminum alloy 5356 is a commonly used filler metal for welding aluminum alloys, particularly in the construction and fabrication of marine and structural components. It is often employed in gas metal arc welding (GMAW/MIG) and gas tungsten arc welding (GTAW/TIG) processes.
| Mechanical Properties: |
|---|
|
Tensile Strength: 38,000 psi (262 MPa) Yield Strength: 29,000 psi (200 MPa) Elongation: 18% |
| Physical Properties: |
|
Density: 2.68 g/cm3 (0.0975 lb/in3) Melting Range: 575oC-632oC (1067oF-1170oF) |
| Typical Uses: |
| Welding and fabrication of aluminum structures Marine applications Automotive components Structural components in construction |
| Welding: |
| 5356 is known for its good fluidity and penetration characteristics. It provides good strength and ductility in the as-welded condition. Gas Metal Arc Welding (GMAW/MIG): Commonly used for welding applications where high deposition rates are desired. Gas Tungsten Arc Welding (GTAW/TIG): Suitable for applications where high-quality welds are required, such as in the aerospace industry. |
5356 Aluminium Sheets
Alloy : 5356
Temper :
O H14 H24 H18 / T351 T3 T4 T651 T6 / H14 H24 H26 H16 / H32 H111 H321 H116 H112 / T6 T651 / T651 T6 T7451
Thickness : 0.2mm-300mm
Width : 500mm-3000mm
Standard : GB/ 3880-2012 ASTMB209 EN485
Surface Treatment : Mill finish / Brush polish
PVC Coated : One side or two side PVC
MOQ : The inventory has no MOQ
Packing : Standard Export Packing
Port of Dispatch : It depends on the supplier's location and shipping arrangements
Delivery Time : The inventory is 5-7 days . 25-30 days for customized products
Payment : TT / LC / TT+LC
Alloy 5356 Composition: |
|
| Aluminum (Al): | 98.9% |
| Magnesium (Mg): | 4.5%-5.5% |
| Iron (Fe): | 0.4% |
| Copper (Cu): | 0.1% |
| Manganese (Mn): | 0.05%-0.20% |
| Chromium (Cr): | 0.05%-0.20% |
| Titanium (Ti): | 0.06%-0.20% |
| Zinc (Zn): | 0.10% |
| Others: | 0.05% (each) 0.15% (total) |
Considerations: It is often chosen for its good weldability and performance in various welding processes. Post-weld heat treatment is not typically required for 5356.
Corrosion Resistance: 5356 offers good corrosion resistance, making it suitable for welding applications in corrosive environments.
