6060 Aluminium Sheets
Aluminium alloy 6060 is a medium-strength, heat-treatable alloy with good formability and excellent corrosion resistance. It is commonly used in architectural and structural applications due to its favorable combination of mechanical properties and surface finish.
| Mechanical Properties: |
|---|
|
Tensile Strength: 22,000 psi (150 MPa) Yield Strength: 16,000 psi (110 MPa) Elongation: 12% |
| Physical Properties: |
|
Density: 2.70 g/cm3 (0.0975 lb/in3) Melting Range: 585oC-650oC (1085oF-1202oF) |
| Typical Uses: |
| Architectural and structural applications Extruded profiles for window and door frames Heat sinks Automotive components Ladders and scaffolding |
| Welding: |
| 6060 is readily weldable using standard methods such as gas, electric, resistance, and arc welding. However, welding should be approached with caution due to the sensitivity of the alloy to cracking. Special precautions and welding procedures may be necessary. |
| Corrosion Resistance: |
| 6060 has good corrosion resistance, making it suitable for outdoor applications. Its resistance to corrosion can be further enhanced with various surface treatments, such as anodizing. |
6060 Aluminium Sheets
Alloy : 6060 Aluminium Alloy
Temper :
O H14 H24 H18 / T351 T3 T4 T651 T6 / H14 H24 H26 H16 / H32 H111 H321 H116 H112 / T651 T6 T7451
T5: Cooled from an elevated temperature shaping process and artificially aged.
T6: Solution heat-treated and artificially aged.
Thickness : 0.2mm-300mm
Width : 500mm-3000mm
Standard : GB/ 3880-2012 ASTMB209 EN485
Surface Treatment : Mill finish / Brush polish
PVC Coated : One side or two side PVC
MOQ : The inventory has no MOQ
Packing : Standard Export Packing
Port of Dispatch : It depends on the supplier's location and shipping arrangements
Delivery Time : The inventory is 5-7 days . 25-30 days for customized products
Payment : TT / LC / TT+LC
Alloy 6060 Composition: |
|
| Aluminum (Al): | 98.9% |
| Silicon (Si): | 0.6%-1.0% |
| Iron (Fe): | 0.35%-0.6% |
| Copper (Cu): | 0.10%-0.30% |
| Manganese (Mn): | 0.10% |
| Magnesium (Mg): | 0.10% |
| Chromium (Cr): | 0.05% |
| Zinc (Zn): | 0.15% |
| Titanium (Ti): | 0.10% |
| Others: | 0.05% (each) 0.15% (total) |
Considerations: 6060 is known for its good surface finish and is often chosen for applications where aesthetics are important.
It is not as strong as some other aluminum alloys, but its formability and corrosion resistance make it suitable for certain applications.
