6082 Aluminium Sheet
Aluminum alloy 6082 is a medium-strength heat-treatable alloy known for its good formability, weldability, and corrosion resistance. It is commonly used in structural and architectural applications, as well as in the transportation industry. Here are some details about 6082 aluminum alloy:
| Mechanical Properties: |
|---|
|
Tensile Strength: 42,000 psi (290 MPa) Yield Strength: 36,000 psi (240 MPa) Elongation: 12% |
| Physical Properties: |
|
Density: 2.70 g/cm³ (0.0975 lb/in³) Melting Range: 555°C-640°C (1031°F-1184°F) |
| Typical Uses: |
| Structural components in the construction industry Transportation industry (e.g., truck trailers, rail cars) Marine applications Frameworks and scaffolding Automotive components Aerospace components |
| Welding: |
| 6082 is readily weldable using various welding methods, including gas metal arc welding (GMAW/MIG), gas tungsten arc welding (GTAW/TIG), and resistance welding. It responds well to fusion and resistance welding processes. |
| Corrosion Resistance: |
| 6082 has good corrosion resistance, making it suitable for outdoor and marine applications. Its resistance to corrosion can be further enhanced with various surface treatments, such as anodizing. |
6082 Aluminium Sheets
Alloy : 6082 Aluminium Alloy
Temper :
O H14 H24 H18 / T351 T3 T4 T651 T6 / H14 H24 H26 H16 / H32 H111 H321 H116 H112 / T6 T651 / T651 T6 T7451
T6: Solution heat-treated and artificially aged. This is the most common temper for 6082 extrusions, providing good strength and toughness.
T651: Solution heat-treated, stress-relieved by stretching, and artificially aged. Similar to T6 but with additional stress relief.
Thickness : 0.2mm-300mm
Width : 500mm-3000mm
Standard : GB/ 3880-2012 ASTMB209 EN485
Surface Treatment : Mill finish / Brush polish
PVC Coated : One side or two side PVC
MOQ : The inventory has no MOQ
Packing : Standard Export Packing
Port of Dispatch : It depends on the supplier's location and shipping arrangements
Delivery Time : The inventory is 5-7 days . 25-30 days for customized products
Payment : TT / LC / TT+LC
Alloy 6082 Composition: |
|
| Aluminum (Al): | 97.4% |
| Silicon (Si): | 0.7%-1.3% |
| Iron (Fe): | 0.5% |
| Copper (Cu): | 0.1% |
| Manganese (Mn): | 0.4%-1.0% |
| Magnesium (Mg): | 1.0%-1.8% |
| Chromium (Cr): | 0.25%-1.2% |
| Zinc (Zn): | 0.2% |
| Titanium (Ti): | 0.1% |
| Others: | 0.05% (each) 0.15% (total) |
Considerations: 6082 is known for its good machinability and formability.
It is heat-treatable, allowing for improved mechanical properties through post-extrusion heat treatment processes.
